Sep 29, 2026

Wuxi, Jiangsu Sep 29, 2026 (Issuewire.com) - Installing a synchronized T beam welding line allows commercial shipyards across Indonesia and Vietnam to replace weather-exposed manual assembly with mechanized indoor manufacturing. Building marine structural machinery since 1987, Wuxi Hualian Science & Technology Group--known in international shipbuilding as Hualian, supplies engineered marine T-profile production lines. Welded T-profiles represent the primary structural stiffeners reinforcing vessel hull skins, cargo hold decks, and watertight bulkheads across expanding maritime clusters in Indonesia and Vietnam. Transitioning from scattered manual welding grids to an indoor automated production line dramatically lowers shipyard labor costs. Controlled indoor mechanization protects sensitive weld pools from coastal downpours while accelerating dry dock block erection.
The modernization need in Southeast Asian shipyards
Traditional shipyard fabrication relies on manual shielded metal arc welding and semi-automatic flux-cored wire welding on open assembly grids. These manual methods create severe throughput bottlenecks, high welder labor costs, and unpredictable structural rework. Furthermore, tropical coastal humidity and frequent monsoon rains disrupt open-air welding operations, causing moisture-induced porosity in structural hull welds. Modernizing into an indoor automated T-beam production line provides controlled manufacturing conditions, protecting weld arcs and ensuring consistent fabrication schedules. Indoor mechanized fabrication shields operators and sensitive welding fluxes from coastal downpours, enabling shipyards to maintain steady production rates year-round. Transitioning fabrication indoors also improves workplace safety and air quality, helping shipyards attract and retain skilled structural steel fabricators.
Enclosed automated lines reduce airborne welding fumes, creating clean workshop environments that comply with modern industrial health standards. Manual fillet welding on long hull profiles consumes massive volumes of stick electrodes and generates heavy airborne slag dust. Transitioning to automated submerged arc welding encapsulates the electric arc beneath a protective flux layer. This clean operating process dramatically reduces atmospheric particulate emissions across indoor fabrication facilities. Enclosed production bays equipped with automated fume extraction systems maintain clean breathing air for operating technicians. Eliminating toxic welding smoke improves workshop visibility and employee retention in competitive regional maritime industrial zones.
An integrated T-beam line coordinates three production stages
A comprehensive marine T-beam line unites three sequential manufacturing operations into a continuous conveyorized route. First, an automated hydraulic assembly bed aligns the web plate onto the flange, centering the joint under heavy hydraulic clamping pressure. Synchronized tack welding heads deposit rigid structural tacks along the joint seam. Second, the tacked profile transfers to a dual-torch submerged arc welding gantry. Simultaneous twin-fillet welding deposits deep-penetration welds along both sides, preventing asymmetric thermal warpage.
Third, the welded profile enters an integrated HL06-00T hydraulic straightening machine. The unit processes flange thicknesses from 10 mm to 50 mm and web thicknesses from 8 mm to 30 mm. It straightens sections up to 800 mm high at a correction speed of 8 meters per minute. Heavy-duty mechanical rollers hydraulically correct angular flange warpage back to true perpendicular tolerance, ensuring completed profiles satisfy strict IACS shipyard rules. Automating these three core operations on a connected roller conveyor eliminates crane transfers, reducing profile handling time by more than fifty percent. Continuous mechanical straightening delivers flat, true profiles that fit flush against hull plating without costly hydraulic jacking on the erection grid.
Motorized centering rollers position web plates symmetrically against flange centerlines before tack welding heads engage. Automatic pneumatic clamping jaws lock the web securely in the vertical plane, eliminating assembly gaps. Precise mechanical centering guarantees that finished T-profiles satisfy strict bilateral balance criteria required for maritime bulkhead stiffeners. The hydraulic straightening unit incorporates hardened alloy steel correction rollers that resist abrasive wear from hot-rolled plate scale. Quick-adjust mechanical handwheels set roller gaps rapidly to match varying flange thicknesses between production batches.
How automation solves maritime structural bottlenecks
Deploying continuous T-beam automation eliminates crane transfer delays between cutting, welding, and straightening stations. Motorized roller conveyors advance heavy profiles smoothly, keeping cranes free for block erection. Mechanized submerged arc welding delivers uniform weld bead geometry and consistent root penetration that satisfies strict inspection standards from IACS societies, including ABS, DNV, and BV. Reduced angular warpage ensures seamless fit-up during subsequent hull block assembly, slashing fairing labor in the dry dock. Eliminating fit-up gaps and wavy profile edges saves hundreds of hours of flame straightening during module erection on the slipway. Tight dimensional tolerances also improve fatigue performance, extending the structural service life of commercial vessels operating in harsh offshore environments.
High-deposition submerged arc welding delivers deep, uniform root fusion that resists severe cyclic fatigue loads encountered in commercial shipping operations. Eliminating weld start-stop defects reduces non-destructive testing rejections, accelerating structural block release into final shipyard paint bays. Precision T-profile dimensions simplify robotized welding of transverse hull frames during three-dimensional block assembly. Uniform stiffener geometry prevents robot vision sensor tracking errors, ensuring uninterrupted automated welding in downline fabrication halls.
Plan the change in people's work alongside the equipment
Successful technology adoption requires pairing new automated machinery with comprehensive workforce training. Transitioning from manual stick welding to automated gantry controls changes operator daily responsibilities. Shipyard fitters and welders must be trained to operate digital touchscreen consoles, calibrate optical seam tracking sensors, and monitor flux recovery circuits. Building local technical proficiency ensures long-term operational reliability and high machine uptime. Developing internal maintenance capabilities empowers shipyard technicians to conduct routine lubrication, seal replacements, and electrical diagnostics independently. Empowered operators take ownership of production parameters, continuously refining welding travel speeds to match varying steel plate batches. Cross-training floor operators in basic electrical troubleshooting and pneumatic maintenance reduces reliance on external service technicians. Operators capable of diagnosing sensor faults keep automated welding lines running at peak productivity.
A phased modernization roadmap for expanding yards
Shipbuilders balancing capital expenditure budgets can execute modernization programs through a disciplined four-phase implementation roadmap. Phase 1 focuses on civil foundation preparation and mechanical alignment, validating reinforced concrete slab levels and aligning machine centerlines across the full bay length. Phase 2 encompasses electrical integration and dry-cycle testing, terminating three-phase power, verifying sensor signals, and testing emergency stop circuits. Phase 3 executes parameter qualification and live submerged arc trial welding on marine steel plates to satisfy non-destructive testing criteria. Finally, Phase 4 concludes with commercial commissioning, production shift validation, and comprehensive operator maintenance training.
Modernize shipyard T-beam fabrication with Hualian
Investing in automated T-profile fabrication provides a scalable foundation for modern shipbuilding productivity. Sizing equipment around target vessel designs ensures capital investments deliver rapid operational returns.
Shipyard executives and marine engineering managers in Indonesia and Vietnam can explore customized T-beam production line layouts, equipment capacities, and commissioning support with Hualian: https://www.hualianoversea.com/. Hualian partners with regional shipbuilders to establish high-efficiency structural manufacturing facilities.

Source :Wuxi Hualian Science & Technology Group
This article was originally published by IssueWire. Read the original article here.
The audit authority has cleared a key hurdle for six stalled public housing projects totaling nearly 4,000 units after the Korea Chamber of Commerce and Industry (KCCI) sought a preliminary consultation on behalf of builders struggling with soaring construction costs. The KCCI said on Tuesday that the Board of Audit and Inspection (BAI) determined that project costs for the six sites, covering 3,936 housing units, can be recalculated to reflect current market conditions. The case marks the KCCI’s first use of the consultation program since it was opened to private organizations in May. “Companies have faced difficulties for a long time, but this was not an issue they could easily make a decision on,” Lee Jong-myung, head of the KCCI's industry innovation division, said. “The BAI's decision to open its doors to the private sector has added another channel for resolving corporate difficulties, and its first result will benefit the public through housing supply.” The six projects are part of a public-private housing program, with public agencies providing the land while private bu
Private companies played a significantly greater role in the successful fifth launch of Korea’s Nuri rocket on Wednesday, signaling that the country’s efforts to keep pace with the global shift toward a private sector-led “New Space” era are gaining momentum. The Nuri rocket completed its fifth launch and 20-minute-long flight successfully after lifting off at the Naro Space Center in Goheung, Jeonnam-Gwangju Special Metropolitan City, at 12:25 p.m. The most notable change in the latest launch was not the rocket itself, but the growing presence of private-sector personnel at the launch site. Hanwha Aerospace has overseen the manufacturing of the Nuri rocket as its system integrator since the fourth launch on Nov. 27 last year, but this time, its role expanded to the consoles at the launch control center. Hanwha Aerospace deployed 42 staffers for the fifth launch. They participated in operations at 20 of the 22 consoles responsible for launch vehicle systems, and at 18 of them, Hanwha employees directly operated the controls instead of specialists from the Korea Aerospace Researc
Hackers once had to manually test security defenses, identify vulnerabilities and work out how to exploit them. Now, artificial intelligence (AI) can do much of that work, requiring little human input. That possibility is at the center of Korea's latest security crisis in the financial sector, as investigators have found traces of an AI-powered autonomous penetration-testing tool in a series of recent cyberattacks on the country's major banks. Since last week, Shinhan Bank, KB Kookmin Bank, Hana Bank, Yegaram Savings Bank and BNK Busan Bank have all reported data breaches, while Woori Bank and NH NongHyup Bank have detected signs of hacking attempts, though no data leaks were confirmed. Shinhan Bank reported that about 25,000 customers were affected, with personal information including names, phone numbers, annual income and loan limits exposed. KB Kookmin reported 119 affected customers, while Hana Bank said personal information belonging to 89 customers was exposed. The hacking spree has drawn particular concern after investigators reportedly found traces of an AI-powered tool known as
SK Energy and HD Hyundai Oilbank may face sanctions from the Fair Trade Commission (FTC) over allegations that they colluded on gasoline, diesel and kerosene prices, with combined fines potentially reaching 4.63 trillion won ($3.45 billion). The antitrust regulator said Wednesday that it sent a review report to the two companies, formally launching deliberations over the alleged price-fixing case. The FTC said the alleged collusion lasted from February 2022, shortly before Russia's invasion of Ukraine, through March this year, shortly after the outbreak of the war in Iran. The case covers petroleum products that are essential to household and economic activity. Korea's oil refining industry is highly concentrated, with SK Energy, HD Hyundai Oilbank, GS Caltex and S-Oil accounting for about 98 percent of the domestic market. According to the FTC, SK Energy and HD Hyundai Oilbank exchanged information on the prices of gasoline, diesel and kerosene, including provisional prices, final prices and sales policies. The regulator also determined that the two companies colluded on prices followin
Countries’ regulations on imported foods containing beef tallow pose a hurdle for Samyang Foods as the Korean instant noodle giant seeks to expand exports of its latest black bean sauce instant noodles, Charrr. The company has established Buldak as a massively popular product around the globe without using beef tallow, selling 10 billion units and generating cumulative sales of 7 trillion won ($5.2 billion) as of June. Unlike the spicy, brothless instant noodle brand, however, Charrr uses beef tallow as a key ingredient to give its sauce a rich, beefy flavor. Charrr is not Samyang’s first instant noodle product using beef tallow. The company launched Samyang 1963 in November last year with the ambitious goal of reviving the “forgotten” taste of its first instant noodle product, Samyang Ramen, which was introduced in 1963 and used beef tallow. Samyang Ramen, introduced by the late company founder Chun Joong-yoon to help feed a population suffering from widespread poverty at the time, remains a cornerstone of the company’s identity. Its use of beef tallow has now become part of
A growing number of customers affected by a string of recent personal data breaches at major commercial banks and other financial firms appear to be turning to class action lawsuits in pursuit of compensation, according to industry officials, Wednesday. The banks have pledged to fully compensate customers whose losses, including those from voice phishing scams, are found to have directly resulted from the leaks. But proving that a loss was caused by a specific data breach can be difficult in practice, and the banks have yet to set out clear standards for determining which claims would qualify, prompting some victims to resort to legal action. Seven financial firms have reported information leaks so far, including three of the country’s largest commercial lenders — Shinhan Bank, KB Kookmin Bank and Hana Bank. Shinhan reported the largest breach, affecting around 25,000 people, followed by 119 at KB Kookmin and 89 at Hana Bank. The exposed data includes customers’ names, contact details, resident registration numbers, annual income and loan limits. The combination of personal and fin
Korea’s domestically-developed Nuri rocket successfully carried out its mission in its fifth launch Wednesday, sequentially deploying 14 out of 15 satellites it carried into their target orbit. The key objective of the fifth launch was to safely deploy the five microsatellite constellations, and the success has demonstrated Korea's increased multi-satellite launch capabilities, taking another step toward privately led commercial launch services. The rocket lifted off from the launchpad at the Naro Space Center in Goheung, Jeonnam-Gwangju Special Metropolitan City, at 12:25 p.m. and completed its roughly 20-minute flight at around 12:45 p.m. The rocket separated its first stage about two minutes after liftoff, followed by the second stage about four and a half minutes into the flight. At around 12:40 p.m., it reached an altitude of 570 kilometers and completed the sequential deployment of five New-space Earth Observation Satellite Constellation for National Safety (NEONSAT) microsatellites (satellites No. 2 to 6), its primary payload, along with nine of the 10 CubeSats it carried. Initi
U.S. chip giant AMD announced Wednesday that it plans to establish an artificial intelligence (AI) research center in Korea by the end of this year and hire hundreds of researchers as part of broader AI cooperation between the company and Korea. The announcement came during a meeting between AMD CEO Lisa Su and Second Vice Minister of Science and ICT Ryu Je-myung in Seoul. AMD also plans to help develop graduate-level AI and AI transformation talent and collaborate with Korea on a reference model for heterogeneous AI computing. The model would combine AMD’s central processing units (CPUs) and graphics processing units (GPUs) with domestically developed neural processing units (NPUs). The meeting, arranged by the Ministry of Science and ICT, served as an interim review of AI cooperation agreed upon by the ministry and AMD during President Lee Jae Myung’s attendance at the San Francisco AI Summit in July. AMD also outlined plans to work with Korea’s private sector to create new business opportunities. At a subsequent roundtable with 13 Korean companies involved in AI infrastructure, c
President Trump’s selection of four administration officials to head up his new “Super Intelligence Force” is offering a window into how the White House will approach AI in the face of pressure over its risks. The group of government leaders each reflect different priorities of the Trump administration after months of mixed messaging on the...
The Nuri rocket successfully lifted off on its fifth launch and deployed 14 of the 15 satellites it carried into their target orbit Wednesday. The rocket lifted off from the second launch pad at the Naro Space Center in Goheung, Jeonnam-Gwangju Special Metropolitan City, at 12:25 p.m. and completed its roughly 20-minute flight at around 12:45 p.m. The rocket separated its first stage about two minutes after liftoff, followed by the second stage about four and a half minutes into the flight. At around 12:40 p.m., it reached an altitude of 570 kilometers and completed the sequential deployment of five NEONSAT swarm microsatellites (satellite No. 2 to 6), its primary payload, along with nine of the 10 CubeSats it carried. Initially, the Nuri sent signals indicating that all of the CubeSats had been successfully deployed. However, subsequent checks found that PERSAT02, developed by Quaternion, had failed to separate from the rocket. The flight ended at around 12:45 p.m. after the third stage completed its autopilot sequence. "The Nuri rocket successfully completed its planned fifth launch mis
Southeast Asia’s foodtech story was supposed to be about disruption: lab-grown shrimp on every plate, groceries at your door in 15 minutes, ghost kitchens replacing the corner restaurant. The reality has been humbler, and arguably more interesting. The 2022 correction thinned the herd, the eFishery scandal and TaniHub’s collapse left scars, and many of the […] The post Southeast Asia’s foodtech winners are the least glamorous ones appeared first on e27.
Some Japanese words resist translation. Take rōrō kaigo (老老介護). The character rō means “elderly”, and repeating it describes an elderly person caring for another elderly person, such as an 80-year-old husband looking after his equally frail wife on his own. That is the reality the word captures. Then there is the darker ninnin kaigo (認認介護). […] The post When the carer has dementia too: Japan turns to physical AI to rescue eldercare appeared first on e27.
YOUR NEWS, OUR NETWORK.
Do you have Great News you want to tell the world?
Be it updates about your business or your community, you can make sure that it’s heard by submitting your story to our network reaching hundreds of news sites across 6 verticals.